Eco-friendly E-coating: Corrosion resistance excellence for Sarnia-Lambton, Ontario and area

Electocoating or e-coating is preferred to other paint products and liquid coatings because it doesn’t use solvents to provide corrosion resistance to metal parts. It uses electrical current to deposit the paint onto the part surface. It’s considered environmentally friendly because it does not emit residual VOCs (Volatile Organic Compounds) into either the production environment nor the surrounding atmosphere.

The e-coating process is a closed system. Tiny electrically charged paint atoms are held in suspension in a water bath until drawn to a part of opposite charge. The paint does not pass through the air and cannot adhere to any surface but the charged part, there is no overspray. The rinsing process collects any excess paint from the part and returns it to the electro-coat bath with almost zero waste.

Favoured for its ability to cover complex parts, e-coating can provide corrosion resistance to metal parts of all shapes and sizes. It can reach inside surfaces and cover bends and creases while maintaining required coating thickness without drips or runs.

Hard, Durable Powder Coating Finish: Environment friendly – corrosion resistance, available to Sarnia-Lambton, Ontario and surrounding areas

One more choice for hard and durable corrosion resistance is powder coating. This eco-friendly process relies on electrostatic spray deposition (ESD), not solvents, to apply the paint finish to parts. Finely ground dry paint powder is electrostatically charged and spray applied to a grounded part. Parts then pass through a curing oven where the paint particles melt and form a continuous protective covering.

Also free of unsafe VOC out-gassing associated with solvent based paints, powder coating is much more eco-friendly. Residual powder from the application process is collected and reused, and the disposal of waste powder is simpler than solvent-based liquid.

You can extend the functional life of coated parts, over liquid paints, with tougher, longer wearing powder coating. Oven-curing creates a thicker more uniform coating thickness across the part surface without drips, sags or runs. Powder coating resists chipping, scratching, fading and wear better than liquid paint.

Corrosion resistant parts provided to Sarnia-Lambton, Ontario

The primary benefits of e-coating and powder coating are that both are environmentally friendly without sacrificing uniformity, beautiful appearance, and superior corrosion protection.

We at Onbelay Automotive Inc, are proud to serve your corrosion resistance needs throughout Sarnia-Lambton, Ontario and vicinity.

Call us to discuss your requirements today 519.354.6515